Brake Shoes, Brake Pads And Brake Drums The Difference Between The Three

- Sep 16, 2017 -

Brake shoes, brake pads and brake drums the difference between the three?

Brake shoe refers to the brake cam or push the role of the push was pushed out to start the brake brake drum action, its shape such as half moon.

Brake pads are also called brake pads. In the car's braking system, the brake pads are the most critical safety parts, all the braking effect is good or bad brake pads play a decisive role, so that good brake pads are the protection of God and the car.

Brake lining (brake lining) generally by the steel plate, bonding insulation layer and friction block, steel to be coated to rust, coating process with SMT-4 furnace temperature tester to detect the temperature distribution of the coating process to ensure that quality. The insulation layer is composed of non-heat transfer material, the purpose is to heat. Friction block from the friction material, adhesive composition, the brake was squeezed in the brake disc or brake drum on the friction, so as to achieve the purpose of vehicle braking. Due to friction, the friction block will gradually be worn, in general, the lower the cost of the brake pads wear faster.

The brake drum is a cast iron piece of a shape similar to the tambourine, which is fixed with the tire and rotates at the same speed. Brake Shoes Brake Shoes Touch the inner edge of the brake drum to suppress the rotation of the tire to achieve the purpose of braking. Drum brake by the brake floor, brake cylinder, brake shoe and other related links, springs, shoot nails, brake drums. Currently only used in the rear wheel. The cost of drum brakes is lower, the absolute braking force is higher, and the rear wheels of the small cars are used more. But its high wear rate, so the overall higher cost at the same time.

Hangzhou Danna Auto Parts Co., Ltd

Address: Room 1018,Yaqi Building,No 3786 Jiangnan Avenue,Binjiang

Tel: +86-571-86967573

Fax: +86-571-86967537

E-mail: zxl@shinesea-intl.com